DIN EN 298
Automatic burner control systems for burners and appliances burning gaseous or liquid fuels.
Official standard pageTAKSAM / Standards
Reference Standards & Engineering Basis
استانداردهای مرجع و مبنای مهندسی
A practical reference section for standards related to burner control, pressure vessels, hazardous areas, and steel gas-pipe welding. Applicability depends on project scope, local regulation, equipment rating, fuel type, operating pressure, and client requirements.
بخشی مرجع برای استانداردهای مرتبط با کنترل مشعل، مخازن تحت فشار، محیطهای خطرناک و جوشکاری لولههای گاز فولادی. کاربرد هر استاندارد به دامنه پروژه، مقررات محل اجرا، رتبه تجهیزات، نوع سوخت، فشار کاری و نیاز کارفرما بستگی دارد.
این صفحه بهعنوان مرجع استانداردها نوشته شده است، نه ادعای گواهینامه. گواهیها، گزارشهای آزمون و تأییدیههای رسمی فقط در صورت وجود سند باید اضافه شوند.
Burner control & combustion safety
DIN EN 676
Forced-draught burners for gaseous fuels.
Official standard pageDIN EN 746-2
Industrial thermoprocessing equipment - safety requirements for combustion and fuel-handling systems.
Official standard pageAPI RP 556
Instrumentation, control, and protective systems for fired heaters.
Official standard pagePressure vessels
DIN EN 13445-1
Unfired pressure vessels - Part 1: General.
Official standard pageASTM A516/A516M
Carbon-steel plates for welded pressure vessels where notch toughness is important.
Official standard pageAPI 510
Pressure Vessel Inspection Code for in-service inspection, rating, repair, and alteration.
Official standard pageHazardous areas / EX environments
DIN EN IEC 60079-10-1
Classification of areas - explosive gas atmospheres.
Official standard pageDIN EN 60079-10-2
Classification of areas - explosive dust atmospheres.
Official standard pageAPI RP 500
Class I, Division 1 and Division 2 classification at petroleum facilities.
Official standard pageAPI RP 505
Class I, Zone 0, Zone 1, and Zone 2 classification at petroleum facilities.
Official standard pageASTM E681
Concentration limits of flammability of chemicals, vapors, and gases.
Official standard pageSteel gas pipe welding - under 4 in / 150 psi project context
API 1104
Welding of pipelines and related facilities.
Official standard pageDIN EN ISO 15614-1
Specification and qualification of welding procedures for metallic materials - arc and gas welding of steels.
Official standard pageDIN EN ISO 9606-1
Qualification testing of welders - fusion welding - steels.
Official standard pageASTM A53/A53M
Black and hot-dipped galvanized welded and seamless steel pipe.
Official standard pageASTM A106/A106M
Seamless carbon-steel pipe for high-temperature service.
Official standard page